Anti-Stains Paint
A high-coverage matte white anti-stains spray paint that seals and covers tough stains on walls and ceilings, while helping inhibit moisture. Designed for fast, practical repairs, it blocks common marks like smoke, nicotine, pen, and damp-related staining, without yellowing. Premium European quality and 100% made in Spain.
Ideal for: stain blocking on walls and ceilings, concrete, drywall, plaster, masonry, and wood surfaces, rental property touch-ups, quick maintenance jobs, kitchens, corridors, and moisture-prone areas in Lahore and across Pakistan.
₨ 3,450
What This Anti-Stains Spray Paint Does
Anti-Stains Spray Paint is a matte white stain-blocking spray made to cover and seal stubborn wall and ceiling stains so they do not bleed back through after repainting. It is built for practical repairs in Pakistan where stains from smoke, nicotine, pen marks, and damp patches often reappear even after normal paint. It gives you a fast aerosol workflow for touch-ups and patch repairs on common building surfaces in Lahore and across Pakistan.
Technical Data (specifications)
- CAN Size: 400ml
- Coverage area: 2 m²
- Drying time: 2h
- Repainted after: 10min
- Finish: Matte White
- Origin: 100% made in Spain
About The Product
The Pakistan problem it solves
In Pakistan, many stain issues are not paint problems, they are stain-bleed problems. Smoke and nicotine can keep migrating, pen marks can ghost through, and damp staining can return after humidity changes. People end up repainting repeatedly because the stain is still active underneath.
This anti-stains spray is designed to seal those tough marks as a base layer, so your final coat stays clean and consistent instead of showing patches and reappearing shadows.
What this product does
- Covers and seals tough stains on walls and ceilings so they are less likely to reappear through the topcoat
- Helps block common stains such as pen, smoke, nicotine, and moisture marks
- Provides a matte white base that supports cleaner repainting and patch uniformity
- Offers high coverage and is designed not to yellow
- Helps inhibit moisture-related staining behavior on affected areas
Where to use it
Typical stain repair zones
- Walls and ceilings with smoke or nicotine staining
- Damp patch areas after the source of moisture is fixed
- Pen, marker, and scuff stain repairs
- Patch repairs where old stains keep showing through fresh paint
Suitable surfaces
- Concrete
- Drywall
- Plaster
- Wood
- Masonry and similar building surfaces
Practical note
This product seals stains. It does not solve an active leak or rising damp. Fix the moisture source first, let the surface dry properly, then seal and repaint.
Key features and benefits
- Matte white anti-stains coating designed for walls and ceilings
- High coverage for faster patch repair work
- Designed not to yellow, supporting cleaner long-term appearance
- Helps inhibit moisture stain behavior on repaired zones
Effectively blocks wall stains for long-lasting surface protection.
Provides durable and effective stain blocking paint spray coverage
- Fast repainting window for quicker job completion
- Aerosol control for edges, corners, and small repair patches without brush marks
How to apply (step by step)
- Ensure the surface is clean, dry, and free from dust, loose paint, grease, and contamination
- Clean the stained zone properly so the coating can bond evenly
- Shake the can vigorously for 1 minute after the mixing balls sound
- Spray from about 25 to 30 cm distance
- Apply thin, quick coats, first horizontally then vertically
- Prefer two thin coats instead of one thick coat to avoid sags and patchiness
- Allow it to dry properly. Typical drying is about 2 hours
- Repaint after about 10 minutes when you need a faster workflow, or follow your site conditions for best results
- After finishing, invert the can and spray until only gas comes out to help prevent nozzle clogging
Safety, storage and handling
- Use in a well-ventilated area
- Keep away from heat, sparks, and open flame
- Pressurized container. Do not puncture or burn
- Avoid inhalation of spray mist. Use a suitable mask for repeated spraying
- Wear gloves and eye protection, especially during overhead work
- Store in a cool, dry place away from direct sunlight
- Keep out of reach of children
- Do not use on devices connected to the electrical network
Why choose Spanish made Anti-Stains Spray Paint
Stain-blocking only works when the film builds evenly and seals consistently across the stained zone. This Anti-Stains Spray Paint is made to deliver a stable matte white sealing layer with predictable coverage, helping repaint jobs look cleaner and stay cleaner on walls and ceilings in Pakistan where smoke and damp staining are common.
FAQs
Q1: What is Anti-Stains Spray Paint used for?
It is used to cover and seal tough stains on walls and ceilings so they are less likely to bleed through after repainting.
Q2: Which stains can it help cover?
It is commonly used to cover stains such as pen marks, smoke, nicotine, and moisture-related marks.
Q3: Where can I apply it?
It can be applied on common building surfaces such as concrete, drywall, plaster, wood, and masonry when the surface is clean and dry.
Q4: Is it matte or glossy?
It is a matte white anti-stains spray paint.
Q5: How long does it take to dry?
Typical drying time is about 2 hours, depending on ventilation and conditions.
Q6: When can I repaint over it?
It can be repainted after about 10 minutes for a fast workflow.
Q7: Will it stop an active damp problem?
It helps seal and inhibit moisture stain behavior, but you should fix the source of moisture first. If the leak or damp source remains, staining can return.
Q8: Does it yellow over time?
It is designed not to yellow.
Q9: How do I avoid patchiness on a repaired ceiling spot?
Clean properly, spray from 25 to 30 cm, and apply two thin coats. Thick coats can sag and look uneven after repainting.
Q10: Do you deliver in Lahore and across Pakistan?
Yes, we deliver across Pakistan, with free delivery within Lahore.